Preparation, coverage, & application
The secret to a truly exceptional finish lies in mastering three essential elements: preparation, coverage, and application. By dedicating time to properly prepare your surfaces, you create a smooth, durable foundation, whilst a careful and considered application will bring your chosen colour to life, creating a beautiful, professional finish you'll love (and will last) for years to come. We have provided our recommendations for each surface type below to help you achieve the best possible results. come one
Little Knights emulsion provides exceptional coverage and opacity for interior ceilings and walls. This specialist coating is formulated with ease of use in mind, providing a beautiful finish that you can be proud of. For use on interior walls and ceilings.
• Approximate coverage
12sqm per litre (Typical need 1 to 2 number of coats)
9sqm per 750ml tin | 30sqm per 2.5 litre tin | 60sqm per 5 litre tin
• Preparation
Remove any loose and flaking material then fill holes and cracks with an appropriate filler. Glossy surfaces should be sanded to provide a key. Given the high quality of this formulation, the paint can be thinned if required by adding up to 10% water for the first coat only. This is particularly recommended for porous surfaces. If your room has been newly renovated, please read our advice 'Tips for painting on a freshly plastered wall'.
• Application
Stir well before use. Always check a small area first as we cannot accept any responsibility for colour discrepancy that may arise after use. Apply one or more coats as required using a paintbrush, paint pad or roller. Avoid spreading the paint too thinly and avoid reworking areas that are still wet. An extra coat may be required to cover strong or contrasting colours. Do not apply in damp or cold conditions below 10°C.-
• Job done!
Touch dry in 1-2 hours. Recoatable in 2-4 hours. Replace lid firmly to ensure an airtight seal. Remove as much paint as possible from decorating tools before cleaning in warm soapy water, then rinse and dry thoroughly. Do not empty surplus paint into drains and watercourses - most local authorities will have special facilities for the disposal of waste coatings and paint, contact them for details.
• Cleaning and aftercare
Allow to dry for at least 7 days after application before wiping the surface. Clean painted surface with a soft cloth and clean soapy water.
Little Knights trim paint provides exceptional coverage and opacity for interior wood. This specialist coating has been formulated with ease of use in mind, providing a durable, wipeable finish to be proud of.
• Approximate coverage
12sqm per litre (Typical need 1 to 2 number of coats)
9sqm per 750ml tin | 30sqm per 2.5 litre tin | 60sqm per 5 litre tin
• Preparation
Remove any loose and flaking material then fill holes and cracks with an appropriate filler. Glossy surfaces should be sanded to provide a key.
• Application
Stir well before use. Always check a small area first as we cannot accept any responsibility for colour discrepancy that may arise after use. Apply one or more coats as required using a paintbrush, paint pad, or roller. Avoid spreading the paint too thinly and avoid reworking areas that are still wet. An extra coat may be required to cover strong or contrasting colours. Do not apply in damp or cold conditions below 10°C.
• Job done!
Touch dry in 1-2 hours. Recoatable in 2-4 hours. Replace lid firmly to ensure an airtight seal. Remove as much paint as possible from decorating tools before cleaning in warm soapy water, then rinse and dry thoroughly. Do not empty surplus paint into drains and watercourses - most local authorities will have special facilities for the disposal of waste coatings and paint, contact them for details.
• Cleaning and aftercare
Allow to dry for at least 7 days after application before wiping the surface. Clean painted surface with a soft cloth and clean soapy water.
Little Knights cot and furniture paint provides exceptional coverage and opacity for interior furniture. This specialist coating has been formulated with ease of use in mind, providing a durable satin finish to be proud of.
• Approximate coverage
12sqm per litre (Typical need 1 to 2 number of coats)
9sqm per 750ml tin
• Preparation
Remove any loose and flaking material then fill holes and cracks with an appropriate filler. Glossy surfaces should be sanded to provide a key.
• Application
Stir well before use. Always check a small area first as we cannot accept any responsibility for colour discrepancy that may arise after use. Apply one or more coats as required using a paintbrush, paint pad or roller. Avoid spreading the paint too thinly and avoid reworking areas that are still wet. An extra coat may be required to cover strong or contrasting colours. Do not apply in damp or cold conditions below 10°C.
• Job done!
Touch dry in 1-2 hours. Recoatable in 2-4 hours. Replace lid firmly to ensure an airtight seal. Remove as much paint as possible from decorating tools before cleaning in warm soapy water, then rinse and dry thoroughly. Do not empty surplus paint into drains and watercourses - most local authorities will have special facilities for the disposal of waste coatings and paint, contact them for details.
• Cleaning and aftercare
Allow to dry for at least 7 days after application before wiping the surface. Clean painted surface with a soft cloth and clean soapy water.
Little Knights radiator paint provides exceptional coverage and opacity for interior metal. This specialist coating has been formulated with ease of use in mind, providing a durable satin finish to be proud of.
• Approximate coverage
12sqm per litre (Typical need 1 to 2 number of coats)
9sqm per 750ml tin
• Preparation
Remove any loose and flaking material. Glossy surfaces should be sanded to provide a key.
• Application
Ensure radiator is stone cold before painting. Stir well before use. Always check a small area first as we cannot accept any responsibility for colour discrepancy that may arise after use. Do not apply in damp or cold conditions below 10°C.
Apply using a paintbrush or mini roller. Avoid spreading too thinly, and avoid reworking areas that are still wet. An extra coat may be required to cover strong or contrasting colours.
• Job done!
Touch dry in 1-2 hours. Recoatable in 4-6 hours. Wait at least six hours after application of final coat before turning radiator on. Replace lid firmly to ensure an airtight seal. Remove as much paint as possible from decorating tools before cleaning in warm soapy water, then rinse and dry thoroughly. Do not empty surplus paint into drains and watercourses - most local authorities will have special facilities for the disposal of waste coatings and paint, contact them for details.
Cleaning and aftercare
Allow to dry for at least 7 days after application before wiping the surface. Clean painted surface with a soft cloth and clean soapy water.
Little Knights external paint gives exceptional coverage and opacity, providing a tough, flexible, and durable glossy finish to be proud of. This specialist coating has been formulated to be quick drying, microporous and breathable, alkali resistant, non-flammable, and heat resistant up to 80oC.
• Approximate coverage
12sqm per litre (Typical need 1 to 2 number of coats)
9sqm per 750ml tin | 30sqm per 2.5 litre tin | 60sqm per 5 litre tin | 120sqm per 10 litre tin
• Preparation
The substrate must be sound, dry and free from oil and grease. Cleaning should be carried out with liquid detergent solution, rinsed with clean water and allowed to dry. Surfaces which are contaminated with lichen or moss should be brushed clean, treated with Anti-Fungal Wash and allowed to dry. Timber, metal, and glossy or non-porous surfaces should be rubbed down with abrasive paper prior to application to provide a key.
• Application
For best results apply to a touch dry surface, and at temperatures between 10°C to 32°C. Stir well before use. Always check a small area first as we cannot accept any responsibility for colour discrepancy that may arise after use. Apply by brush or roller. No primer or undercoat is necessary unless used on ferrous metal or where staining could occur. For very porous substrates, thin the first coat with 30% water. Ensure good ventilation during application.
• Job done!
Touch dry very quickly, 20 mins or so on a warm day. Normally recoatable after 4 hours (if required). Replace lid firmly to ensure an airtight seal. Remove as much paint as possible from decorating tools before cleaning in warm soapy water, then rinse and dry thoroughly. Do not empty surplus paint into drains and watercourses - most local authorities will have special facilities for the disposal of waste coatings and paint, contact them for details. Optimum hardness is reached after 2 weeks. Ensure good ventilation during drying.
• Cleaning and aftercare
Clean painted surface with a soft cloth and clean soapy water.
